Using The Blow Function; Emptying The Dust Container; Cleaning The Filters - Westfalia 82 54 37 Bedienungsanleitung

Using the Blow Function

1. Unscrew the cap (6) for the air
outlet and screw on the blowing
adaptor (14) clockwise on the
housing (see right-hand figure). Put
the flexible suction hose (11) on the
nozzle, if required.
2. Switch on the vacuum cleaner to
blow away light dust, dirt, etc.

Emptying the Dust Container

Regularly empty the dust container (9) in time, to maintain an
optimum suction power of the unit.
1. Switch off the vacuum cleaner and pull the power plug.
2. Remove the dust container (9) as described in chapter "Remov-
ing/inserting the Dust Container".
3. Press the release button
(7) at the bottom of the
dust container. The bot-
tom opens and the dust
can drop down.
4. Clear the dust container
content outside
trashcan or into another
suitable container. Close the
dust container.

Cleaning the Filters

 To prolong the service life of the filters and to maintain maximum
performance of the unit, clean the filters in regular intervals when
they are visibly covered with dust.
 The vacuum cleaner is equipped with four filters in total: the
Operation
into a
18
Blowing Adaptor