Philips AquaTrio Cordless 7000 Serie Bedienungsanleitung Seite 20

English
20
Clearing blockages from the main body
If there is a blockage in the appliance, first switch off the appliance and remove
the dirty water tank. Then remove the blockage by moving the cleaning brush up
and down in the suction channel of the main body.
Clearing blockages from the AquaSpin nozzle
If there is a blockage in the AquaSpin nozzle, remove the brushes from the
nozzle. Then move the cleaning brush up and down in the suction channel of the
AquaSpin nozzle.
Clearing blockages from the wetting strips of the AquaSpin
nozzle
After long and frequent use of the appliance, the wetting strips of the AquaSpin
nozzle may become clogged at some point. Follow the steps below to clear the
blockage of the wetting strips of the AquaSpin nozzle.
1 Remove the wetting strip covers from the AquaSpin nozzle by moving them
sideways.
2 Remove the wetting strips from the AquaSpin nozzle by pulling them out
sideways.