Philips AquaTrio Cordless 7000 Serie Bedienungsanleitung Seite 19

3 Make sure to always put the After-Clean tray back in the Storage station. The
After-Clean tray is essential to perform the AUTOCLEAN correctly.
Cleaning the AquaSpin nozzle
1 Turn the microfiber brushes counterclockwise (1) and remove them from the
AquaSpin nozzle (2).
Tip: In case a microfiber brush is difficult to remove, you can use the
cleaning brush handle to unlock the microfiber brush.
2 You can remove entangled hair or threads from the microfiber brushes by
sliding down the microfiber brushes with one hand.
Tip: You can also use a pair of scissors to cut hairs and threads that have
become entangled around the microfiber brushes.
Removing blockages from the appliance
The appliance may become clogged. You may notice this when more water gets
on the floor than usual or when bigger dirt particles are no longer sucked up and
fall back on the floor. Below you can find the instructions to remove blockages
from different parts of the appliance.
English
19