Uninstattation; Factory Reset - Danfoss 088U0230 Anleitung

Instruction CF-RU Repeater Unit

5 . Uninstattation

Factory reset

•
Disconnect the Repeater Unit from the power supply
• Fix the cable (fig. 12)
• Boiler: Connect the live wire (L) across the Boiler Relay from an ex-
ternal power supply. Make sure the power supply is switched off. Then
connect the live wire, and complete other connections to the boiler in
accordance with existing law.
Note: The relays for pump and boiler are potential free contacts and can thus NOT be used
as direct power supply . Max . load is 230V and 8A / 2A (inductive) !
10
VI .UH .N1 .52
Produced by Danfoss Floor Heating Hydronics 08.2008