Herunterladen Inhalt Inhalt Diese Seite drucken

Connecting The Lawn Mower To The Mains; Switching The Lawn Mower On And Off; Checking The Lawn Mower; Checking The Controls - Still RME 339.0 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

7 Connecting the Lawn Mower to the Mains

► Remove the grass catcher box upwards by the
handle.
► Close the discharge flap.
7
Connecting the Lawn
Mower to the Mains
7.1
Connecting the Lawn Mower to
the Mains
► Insert extension cable connector (1) into
mains plug (2) of the lawn mower.
► Pull the cable loop through aperture (3).
► Fasten the cable loop to hook (4).
The cable connection features strain relief.
► Plug the mains plug of the extension cable into
a correctly installed socket.
8
Switching the Lawn Mower
On and Off
8.1
Switching the Lawn Mower On
► Ensure that the extension cable is routed in
such a way that it is visible and always behind
the lawn mower.
► Do not tilt the lawn mower.
► Place the lawn mower on a level surface.
► Press locking button (1) with the right hand
and hold.
► Pull control bar (2) with the left hand fully in
the direction of handlebar (3) and hold so the
thumb encloses handlebar (3).
The blade turns.
► Release locking button (1).
0478-121-9925-A
► Hold handlebar (3) and control bar (2) with the
right hand so the thumb encloses handle‐
bar (3).
8.2
Switching the Lawn Mower Off
► Release the control bar.
► Wait until the blade is no longer turning.
► If the blade continues to turn: detach the
extension cable connector from the mains plug
of the lawn mower and consult a STIHL spe‐
cialist dealer.
The lawn mower is defective.
9

Checking the Lawn Mower

9.1

Checking the Controls

Locking button and control bar
► Switch the lawn mower off.
► Detach the extension cable connector from the
mains plug of the lawn mower.
► Press the locking button and release it again.
► Pull the control bar fully in the direction of the
handlebar and release it again.
► If the locking button or the control bar is stiff or
does not spring back into the initial position:
do not use the lawn mower and consult a
STIHL specialist dealer.
The locking button or the control bar is defec‐
tive.
Switching the lawn mower on
► Connect the lawn mower to a socket using an
extension cable.
► Press the locking button with the right hand
and hold.
► Pull the control bar with the left hand fully in
the direction of the handlebar and hold so the
thumb encloses the handlebar.
The blade turns.
► If the blade does not turn: switch the lawn
mower off, detach the extension cable connec‐
tor from the mains plug of the lawn mower and
consult a STIHL specialist dealer.
The lawn mower is defective.
► Release the locking button and control bar.
The blade stops turning after a short time.
► If the blade continues to turn: detach the
extension cable connector from the mains plug
of the lawn mower and consult a STIHL spe‐
cialist dealer.
The lawn mower is defective.
9.2

Checking the Blade

► Switch the lawn mower off.
► Detach the extension cable connector from the
mains plug of the lawn mower.
English
31

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis