Specifications - Rockford Fosgate Power-Serie Einbau Und Betrieb

S
PECIFICATIONS
MODEL- POWER
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4 Load Per Channel
2 Load Per Channel
1 Load Per Channel
1
Dimensions: Height
Width
Length
Amplifier Fuse Rating (Amp/Type)
Battery Fuse Rating (Amp) External
(Not Supplied)
Signal-to-Noise Ratio
Crossover Slope
Crossover Frequency
Frequency Response
Slew Rate
IM Distortion (IHF)
Signal Voltage Adjustment Range
Protection
Equalization (Variable Punch Bass)
Input Impedance
Infrasonic Filter
These specifications are Amplifier Power Standard CEA-2006 Compliant
Specifications subject to change without notice
14
All manuals and user guides at all-guides.com
T10001 bd
500 Watts x 1
750 Watts x 1
1000 Watts x 1
2.6" (6.60cm)
12.8" (32.51cm)
18" (45.72cm)
(1) 150A / ANL
150A
Thermal switch shuts down the amplifier in case of overheating.
T20001 bd
750 Watts x 1
1500 Watts x 1
2000 Watts x 1
2.6" (6.60cm)
12.8" (32.51cm)
23" (58.42cm)
(1) 250A / ANL
250A
>80dB A-weighted @ 2Vrms
24dB/octave Butterworth
variable from 32Hz to 250Hz
20Hz to 250Hz -3dB
30 Volts/µS
<0.05%
Variable from 150mV to 4V (RCA Input)
Short circuit protection shut downs the amplifier in
case of very low impedance or shorted speaker wires.
Variable from 0dB to +18dB @ variable 35 to 70Hz
10k ohms
Selectable 12dB/Octave, -3dB @ 28Hz
T30001 bd
1000 Watts x 1
2000 Watts x 1
3000 Watts x 1
2.6" (6.60cm)
12.8" (32.51cm)
33" (83.82cm)
(1) 300A / ANL
300A