Werbung
Montageanleitung / Assembly instruction / Notice de montage
ECO Touchbar EPN 2000 III
für Holz - und Stahltüren nach EN 1125 : 2008 mit Kurzschild(schutz)beschlag
for wooden doors and steel doors acc. EN 1125 : 2008 with (security) handle set on short plate
pour portes métalliques tolées en bois selon EN 1125 : 2008 avec garnitures (de sécurité) sur plaques courtes
Maintenance instructions
To ensure performances which comply with the EN 1125:2008 European Standard, the following routine maintenance checks
are to be performed at intervals of no more than one month, or at least every 20,000 cycles:
a) inspect and operate the panic exit device to check that all the components are in good working condition; use a
dynamometer to measure and record the operating force required to open the exit device.
b) check that the keeper/s are not blocked.
c) check that the panic exit device is well greased.
d) check that no extra blocking devices have been fitted on the door since it was originally assembled.
e) periodically check that all the system components are correct according to the list of certified components, initially supplied
with the system.
f) periodically check that the operating element closes properly and measure the operating force needed to open the exit
device using a dynamometer; check that there has been no significant change in the operating force recorded during initial
assembling.
g) It needs to be checked that latch bolt, dead bolt and panic device are not blocked. The door has to be checked for easy
opening. No deformation must be seen.
h) Check that all screws are tightened / that all parts of the panic device are mounted properly.
No guarantee for
improper use
Safety instructions
The safety features for persons are of paramount importance for this product in
order to ensure compliance with the EN 1125:2008 Standard. No modifications of
any kind are permitted, except for those described in these instructions.
Colour glues the
The colour application of the fittings will withstand daily use if mounting and
use are done properly. Excessive use with hard or edged items (keys, rings
etc) might scratch the surface. The function is, however, not affected.
A warranty claim cannot be filed in this case.
mechanism
Bore chips seize
latch and dead bolt
19/21
Werbung
