Ec Declaration Of Conformity; Protecting The Environment - Black & Decker BCF601 Übersetzung Der Ursprünglichen Gebrauchsanleitung

ENGLISH
The work light will still operate when the tool is in the
u
centre (lock off position).
Hints for optimum use
Always use the correct type and size of screwdriver bit.
u
If screws are difficult to tighten, try applying a small
u
amount of washing liquid or soap as a lubricant.
Use the forward/reverse/lock off collar in the center posi-
u
tion to loosen very tight screws or to firmly tighten screws.
Always hold the tool and screwdriver bit in a straight line
u
with the screw.
When screwing in wood, it is recommended to drill a
u
pilot hole with a depth equal to the length of the screw.
A pilot hole guides the screw and prevents splintering or
distortion of the wood. For the optimum size of the pilot
hole, refer to the table below.
When screwing in hardwood, also drill a clearance hole
u
with a depth equal to half the length of the screw. For
the optimum size of the clearance hole, refer to the table
below.
Screw size Pilot hole Ø
(soft wood)
No. 6 (3.5mm) 2.0mm
No. 8 (4mm) 3.2mm
No. 10 (5mm) 3.5mm
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
Remove the batteries.
u
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly tap bit holder to remove any dust from the
u
interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
6
(Original instructions)
Pilot hole Ø Clearance hole
(hard wood)
2.5mm
3.5mm
4mm 5.7mm
Technical Data
Voltage
Battery
Weight
(without batteries)
Weight
(with batteries)
Level of sound pressure according to EN 62841:
Sound pressure (L
Sound power (L
Vibration total values (triax vector sum) according to EN 62841:
Screwdriving without impact (a

EC declaration of conformity

BCF601- Alkaline Screwdriver
Black & Decker declares that these products described under
4mm
"technical data" are in compliance with:
5mm
2006/42/EC, EN62841-1:2015, EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
Black & Decker Europe, 210 Bath Road, Slough,
Guarantee
Black & Decker is confident of the quality of its products
and offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
V
dc
Kg
Kg
) 60,0 dB(A), uncertainty (K) 3 dB(A)
pA
) 71 dB(A), uncertainty (K) 3 dB(A)
WA
2
) 0,5 m/s , uncertainty (K) 1.5 m/s
h
%
MACHINERY DIRECTIVE
manual.
Black & Decker.
Engineering Manager
Berkshire, SL1 3YD
BCF601
6
AA Alkaline x 4
0.24
0.33
2
R. Laverick
United Kingdom
01/06/2018