Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FHD401
Your products is designed a manufactured with high quality materials and components,
which can be recycled and reused.
TECHNICAL DATA
Voltage: 220-240V~50-60Hz
Power: 2000W
1. Control panel
1a. On/Off button
1b. M button (setting operation
mode when pressed briefly, setting
timer when pressed longer)
OPERATING INSTRUCTIONS
Once the unit is connected to the power source, the heater will go into standby mode. The on/off
button will be illuminated. To start the heater, press the on/off button. To change the operating mode
press the M button. Each press changes the operation mode:
- 1 dot: cold airflow (only the fan is running)
- 2 dots: warm air (1000 W)
- 3 dots: hot blast (2000 W).
To set the expected temperature between 16-37℃, press the + and - buttons.
The heater has a delayed timer function. To set the timer, hold down the M button for a long time (5
seconds), then use the + and - buttons to set the time after which the device should switch off
(maximum 9 hours).
The display switches off (reduces light intensity) after 60 seconds.
CLEANING AND MAINTENANCE
Before cleaning the heater make sure that it has been switched off, unplugged from the power socket.
Make sure the device has cooled down sufficiently.
Air inlets and outlets should be free of dust. Clean with dump cloth and wipe dry.
REMOTE CONTROL
Remote control should be facing the screen. Receiver is placed on the side of the screen. If remote
control will be used from side of the product, it may not work.
1c. + and - buttons
2. Display
3. Air outlet grilles
4. Remote control
7
Werbung
