igloohome Keybox 3 Benutzerhandbuch Seite 13

Audio and LED Indications
Actions
Bluetooth Connection
Successfully Unlocked
Successfully Locked
Incorrect PIN
Deleted PIN
Obstruction Alarm
Security Lockout Alarm
Security Lockout Deactivated
Low Battery Alert
Hard Reset / Unpair
Power Start Up
Airbnb Connect
Airbnb Connect
Airbnb Connect automates the generation of PIN codes for your Airbnb guests based on
their approved reservations. It costs USD$4.99 per month but is currently on free trial.
Here are the steps to activate Airbnb Connect:
Step 1: Connect to your Airbnb
Under "Account Settings", select "Connect with Airbnb", then tap "OK".
Step 2: Connect to Airbnb listings
Under "Reservations", tap the "Add" icon to select a home to connect to.
Select Airbnb listing and PIN time to associate.
Note:
Emails with PIN code will be sent to the guest between 1 to 48 hours before
•
check-in time (configurable).
PINs will only be valid between the check-in and check-out times.
•
Step 3: Change Check-in and Check-out time
Under "Configuration", select "Manage Properties" followed by the listing to view or edit
its details.
Indications
Status indicator flashes blue
Ascending 4 fast tones after unlocked and flash green
LED 2 times
1 long beep after product is locked and Green LED for
2 seconds
4 short beeps and flash Red 2 times
3 sets of 4 short beeps and flash Red 2 times
6 sets of 4 short beeps
Low – High siren for 30 / 60 / 90 seconds
2 long beeps
Descending 3 fast tones when keypad is woken up
and breathing Red LED
Descending 4 slow tones
2 slop beeps then 2 quick beeps
13