Herunterladen Inhalt Inhalt Diese Seite drucken

Pur Line VENTY IND 110PP Anleitung Seite 8

Bodenventilator
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23
EN
· Do not block air intakes or exhaust in any manner.
· Do not insert fingers or allow foreign objects to enter in the guard or the device,
as this may cause an electric shock, fire or damage to the appliance.
· Babies and the elderly should not be directly under high wind for a long time.
· Do not touch the unit with wet or damp hands, if barefooted.
· Use only qualified agents for repairs or services.
· Use the fan away from high temperature, high humidity, acid and alkali oil,
insecticide, curtains and other articles that are easy to be sucked in.
· Do not place appliance (or electrical cord) near an open flame, cooking or
heating device.
· Keep the fan away from curtains or other objects that may be drawn in by the
fan.
· Do not use this device in the immediate surroundings of a bath, a shower or a
swimming pool.
· WARNING: In order to avoid overheating, do not cover the device.
· CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal
cutout, this appliance must not be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly switched on and off by the utility.
· To protect against the risk of electrical shock, do not immerse the unit, cord or
plug in water or other liquid.
· Avoid sharing a power outlet with any other appliances.
· During the transport, assembly and storage, observe not to collide and squeeze
the fan, especially the blade must be properly kept, to avoid any deformation, so
as not to affect the performance of the fan.
· In case of any abnormal noise, smell, smoke and other problems during the
use, shut off the power and send to our after-sales service department for
maintenance.
· CAUTION: Before removing the protective housing, make sure that the fan is
disconnected from the power supply.
· Fan overheating protection: there is a thermal fuse installed in the fan motor,
if the motor is overheated, and the motor temperature reaches the level to
activate the thermal fuse, the fuse will be blown out to cut off the power.
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis