Specifications; Assembly & Operation - Kress KG254E Bedienungsanleitung

9. BLADE SHEATH
* Not all the accessories illustrated or described
are included in standard delivery.

SPECIFICATIONS

TECHNICAL DATA
Type KG254E KG254E.X (230-269- designation
of machinery, representative of cordless hedge
trimmer)
Voltage
No load speed
Max.cutting length
Max.cutting
diameter
Tooth spacing
Machine weight
(bare tool)
** X=1-999，A-Z，M1-M9 there are only used
for different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
Category Model
20V Battery KAB02
20V Charger KAC02
We recommend that you purchase your
accessories listed in the above list from the same
store that sold you the tool. Refer to the accessory
packaging for further details. Store personnel can
assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection.
KG254E KG254E.X**
20V Max*** Lithium
2400 /min
52 cm
14 mm
20 mm
1.99 kg
Capacity
2.0Ah
2.0A
77dB(A)
3.0dB(A)
90dB(A)
3.0dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value a
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared
noise emission value have been measured in ac-
cordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a prelimi-
nary assessment of exposure.
WARNING: The vibration and noise emis-
sions during actual use of the power tool
can differ from the declared value depending on
the ways in which the tool is used especially what
kind of workpiece is processed dependant on the
following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well main-
tained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
antivibration and noise accessories are used.
And the tool is being used as intended by its
design and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of
use should also take account of all parts of the
operating cycle such as the times when the tool
is switched off and when it is running idle but not
actually doing the job.
This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
ASSEMBLY & OPERATION
NOTE: Before using the tool, read the
instruction book carefully.
WARNING! Do not use the product
without attaching the guard and front
< 2.5 m/s²
h
9
EN