Mode Switching; Wired Mode; Bluetooth Mode - DeLUX N618XSD Benutzerhandbuch

Charging
Connect the mouse to the USB port via USB Type-C port of the mouse. The indicator
light turns red when charging and goes off after the charging is complete.
Connection

Mode Switching

Tap the mode switching button to switch between different modes (see below). The
current mode is shown on the OLED screen and the corresponding indicator light
flashes.

Wired Mode

Connect the mouse to the computer via USB Type-C port of the mouse. Tap the mode
switching button until the light goes off. Note that wired mode can only be used if the
mouse is turned on.
2.4G Wireless Mode
Turn on the mouse after inserting the receiver into the device, then tap the mode
switching button to 2.4G wireless mode. The mouse can be used when the
corresponding indicator light goes off.
If you need to restart the mode, press the mode switching button for about three
seconds when you're in 2.4G Wireless mode, the indicator flashes quickly and then goes
off, which means that the reset has been successful.

Bluetooth Mode

Turn on the mouse, tap the mode switching button to BT1/BT2 mode. The
corresponding indicator light will flash, which means you have entered the Bluetooth
mode. The indicator light will flash quickly when you press the mode switching button
for about three seconds – this means you can now search for the mouse on your device.
Search for "BT5.0MOUSE1" or "BT5.0MOUSE2" in your device's Bluetooth settings. The
indicator light will go off when you connect successfully.
4