DeLUX N618XSD Benutzerhandbuch Seite 5

Functions
Light Mode Switching
Pressing the right button and the backward button at the same time switches the
current lighting mode. You can adjust the backlight mode in the driver software.
Automatic Sensing Light
The default is to turn on the light sensation. The backlight goes off when you palm is
close to the mouse. Press the right and left buttons at the same time for about three
seconds, the light sensation turns off after white light flashes twice. Long press the right
and left button to reopen the light sensation.
Disabling Functions of Side Buttons
Press forward button and the backward button for about three seconds to lock the
functions of these buttons. Long press these two buttons to reactive their function.
DPI Switching
Tap the DPI button to switch the DPI.
800 DPI (red light)
•
1200 DPI (green light)
•
1600 DPI (blue light)
•
2400 DPI (purple light)
•
4000 DPI (yellow light)
•
Successful switch is indicated with the corresponding light flashing twice.
Default DPI: 1200. The DPI can be customized in the driver software with range between
600 to 4000 DPI.
Thumb Scroll Wheel
Thumb scroll wheel function is available for Windows only. Rolling up moves the page to
the left, rolling down moves the page to the right.
5