Intended Use; Unpacking Instructions - Deuba monzana Lettelse MZCL10 Bedienungsanleitung

• Do not use any electrical appliances in potentially explosive environments, e.g. in the presence
of flammable liquids, gases or dust. Electrical appliances produce sparks that can ignite dust or
exhaust fumes.

INTENDED USE

This lamp is only to be installed indoors and outside wet rooms. Use the product only for the
purpose it is intended for. The manufacturer accepts no liability for damage caused by improper
use. Any modification to the product may negatively impact safety, cause hazards and invalidate
the warranty.
Only suitable for domestic use; not for commercial use.

UNPACKING INSTRUCTIONS

Open the box and remove the product. After unpacking, please check the product for damage
and to ensure it is complete. Subsequent claims cannot be accepted.
USING THE APPLIANCE FOR THE FIRST TIME
The installation must be carried out by a qualified electrician!
1. Disconnect the power supply.
2. Check the installation area for any hidden supply lines (water, electricity, gas).
3. Open the lamp by unscrewing the right and left side parts.
4. Use the base plate as a template for the drill holes. Mark the drill holes and then drill them.
Wear safety glasses and hearing protection!
5. Insert the included dowels in the holes.
6. Use screws to secure the base plate.
7. Connect the power supply (220 - 240 V~, 50/60 Hz).
CAUTION! Only have this done by a qualified specialist!
8. Slide the hooks through the opening into the rail of the lamp.
9. Close the lamp by screwing the right and left side parts back on.
10. Turn the power back on.
OPERATION
1. Switch the lamp on or off using the on/off toggle switch.
2. As soon as the lamp is connected to the power, you can use the two integrated earthed
sockets (max 3600W), as well as the two 5V 1A USB charging ports as a power source for
other devices.
3. A wide variety of things can be hung on the integrated hooks.
MAINTENANCE AND CARE INSTRUCTIONS
Turn the lamp off and allow it to cool completely. Wipe the lamp with a damp cloth.
Check all the parts for signs of wear. Do not continue to use the product if you find any defects.
Only have parts replaced with original spare parts by a specialist in accordance with the
manufacturer's specifications. A lack of care and maintenance can damage the appliance.
Dangerous situations can arise. To ensure electrical safety, the appliance must not be subjected
to liquids or be immersed in them. Regular maintenance helps to ensure the safety of the product
and increases its service life.
8 www.DEUBAXXL.de