Examples Of Installation; Technical Specifications - Montarbo B115P Bedienungsanleitung

B115P

EXAMPLES OF INSTALLATION

7
Positioning is intuitive. In situations with a seated or standing audience, the use of certified
stands is recommended; these should be placed on a flat surface with the power and
signal cables positioned so that they cannot be walked on, are not stretched and do not
present a tripping or safety hazard.
INSTALLATION ON A TRIPOD STAND
The speaker can be installed on an optional standard tripod stand with 35 mm diameter
pole. The maximum permissible height between the speaker base and the floor is 170 cm.
Any other use requires additional fixing (not supplied). The tilt angle can be set between
0° and 7.5°.
WEDGE INSTALLATION
The speaker cabinet has angled sides so it can be placed on the floor for use as a live
monitor.
INSTALLATION SUSPENDED FROM EYEBOLTS
The speaker can also be suspended using M10 eyebolts. Positioning is shown in the figure
below; the rear eyebolt can be used to adjust the tilt angle (max 45°).
12
TROUBLESHOOTING
8
The speaker does not produce any sound:
Check that the connections to the channel inputs are correct.
Check that the cables used are not damaged. Use only quality cables in good condition.
Check that the audio sources are switched on and show an output signal.
The speaker emits low or distorted sound:
Check the volume of the input source.
Check that the cables used are not damaged. Use only quality cables in good condition
Presence of background noise
Disconnect the speaker form the audio source
Check the signal at the source

TECHNICAL SPECIFICATIONS

9
MODEL
Type
Max SPL (@ 1m)
Frequency response (-10 dB)
Frequency response [-6 dB]
HF
LF
Coverage (H x V)
Crossover frequency
RMS power
Peak power
I/O connectors
Cabinet material
Dimensions (W x H x D)
Weight
User manual
B115P
2-way passive speaker
129 dB
52 Hz – 21 kHz
63 Hz – 20 kHz
1" - 1.75" V.C. (44mm) driver
15" - 3" V.C. (75mm) custom woofer
90° H x 60° V
1.6 kHz
400 W
800 W
2 x TS JACK (Input/Link), 2 x speakON (Input/Link)
®
Polypropylene
430 x 725 x 405 mm
23.5 kg
13