Montarbo B115P Bedienungsanleitung Seite 5

B115P
CONTENTS
1
PACKAGE CONTENTS
2
MECHANICAL/ACOUSTIC FEATURES
3
CONFIGURATION OPTIONS
4
CONNECTIONS
5
QUICK SETUP
6
ACCESSORIES
7
EXAMPLES OF INSTALLATION
8
TROUBLESHOOTING
9
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
1
1 x Passive speaker
1 x User manual - Section 1
1 x User manual - Section 2
The warnings in this manual must be observed together with the "USER MANUAL - Section 2".
8
Thank you for purchasing a Montarbo product, the Italian company founded in 1962, and
since then serving music and audio. The unique and state of the art Montarbo products are
8
designed with the utmost attention to detail and durability. Reliability is in line with the high
quality standards and sensitivity to the environmental impact that distinguish the company.
9
9
10
11
11
12
13
13
MECHANICAL/ACOUSTIC FEATURES
2
The B115P speaker is equipped with a 1" compression driver for high frequencies (voice
coil: 1.75") and a 15" transducer (3" V.C.) for mid and low frequencies. The mechanical
design incorporates 3 integrated handles and a pole mount fitting (Fig.1) which allows the
possibility to set the tilt angle between 0° and 7.5°. The speaker can also be used as a floor
monitor, placing it on either of its two sides to obtain a tilt angle of 40° (Fig.2); it is also
possible to suspend the speaker from the three integrated rigging points (Fig.3). A cover
for transport and weather protection is available.
CONFIGURATION OPTIONS
3
Fig.1
The B115P is a 2-way passive speaker designed for
use in PA systems or as a stage monitor in small to
medium venues. Lightweight with integrated handles,
it is easily portable, extremely versatile and can be used
in a variety of configurations thanks to the integrated
rigging points and optional accessories. The acoustic
components are designed to withstand high sound
pressure levels and make these speakers ideal also for
permanent installations (clubs, venues).
Fig.2 Fig.3
FOR FURTHER INFORMATION
SEE CHAPTER 7
User manual
9