Maintenance - Geco V7 Bedienungsanleitung

Maintenance

The maintenance cycle is based on the mileage of the vehicle and is the guideline for regular maintenance and
lubrication of the vehicle. If the vehicle is driven for a long time at high speed in rough conditions, you must
increase the number of maintenance operations. If the vehicle has been overhauled or collided, it is necessary
to ask the maintenance department staff to carefully check the main parts and repair or replace the misplaced
or damaged parts to ensure safe driving.
Method
When the mileage reaches 3,000 km for the first time, the rear axle gearbox must change the gear oil
◆
and then replace it according to the mileage interval in the table above.
Open bolt 1 to drain the gearbox oil, then tighten bolt 1. Open bolt 2 to fill the gearbox oil (85W/90GL-
◆
4) with approx. 650 mL and tighten bolt 2 again after refuelling.
1
39
2