Status Indication - Von Arx Pressgun Picco 18V Bedienungsanleitung

4. Device description and
basic mode of operation
4.1 Basic mode of operation
The Pressgun Picco operates electrohydrauli-
cally. The hydraulic pump is driven by means of
an electric motor. The hydraulic fluid pressure
acts on the drive piston at one side, and the
press rolls (5) are attached to the piston rod of
this piston. The press rolls produce the pressing
action as the result of the force being diverted via
the cams of the press jaw (7).
4.2 Electronic monitoring and
LED indicators
The Pressgun Picco is monitored electronically in
order to protect against tampering and in order to
ensure perfect pressing results. The status of any
malfunctions are indicated by light-emitting diodes
(LEDs)(2).
8
10

4.4 Status indication

LED Status
Green
Lights
Blinks
Red
Blinks
Lights
Amber
Blinks
Lights
The following are monitored:
• Retaining pin
• Pressing time
• Voltage/rechargeable battery capacity
• Servicing interval
• Operating temperature
Status indications after switching on the
Pressgun
Slide the rechargeable battery into the Press-

gun Picco
Press the „ON-OFF" switch (1).

The LED (2) indicator lights while the „ON-OFF"
switch is pressed in order to check the function of
the three LEDs.
„ON-OFF" switch
The machine can be switched on and off at any
time with the „ON-OFF" switch.
Description
Machine ON
18 V: charge rechargeable battery
Slide pin in
Out of temperature range
Service indicator after 30,000 strokes
Machine is jammed - service after 32,000
strokes or after a defect
1
11
2
Max. 3 pressing operations Size 28 mm per minute
9 9 9
9 9 9
If the machine is not used while it is in ON state,
the electronic circuitry switches the machine to
OFF state after 10 minutes.
4.3 Mechanical construction of the
Pressgun
1 „ON-OFF" switch
2 LED indicators, green, red and amber
3 Trigger switch
4 Device head with press jaw fixture, can be
turned through 180°
5 Press rolls
6 Retaining pin
7 Press jaw
8 Rating plate
9. Plastic shell
10 18 V rechargeable battery – >
see separate illustration see separate illustration
11 Emergency Reset
5
4
3
9
7
6
8