Seek Thermal AttackPRO Gebrauchsanleitung Seite 13

Safety and usage information
8. The service life of the thermal imager depends in part on how it is
used and the environmental conditions in which it is used. Under heavy
usage, or under extreme environmental conditions, the service life of
the equipment may vary.
9. Battery lifespan can vary greatly depending on prolonged exposure
to hot and cold environments, but a typical battery life when used at
ambient conditions of 23˚C (73˚F) is expected to be 3yrs while still
maintaining 80% of its original performance and capacity.
10. While every effort has been made to ensure that your thermal
imager is both tough and reliable, the thermal imager is a sophisticated
electro-optical system that will fail if it is abused or exposed to
environments beyond its design envelope.
11. Do not alter or cover over any labels on the thermal imager.
12. Exposure to some chemicals may degrade the sealing properties of
materials used in the thermal imager and battery assembly.
13. The thermal imager is IP67 rated against debris and water ingress.
However, the thermal imager must not be exposed to debris and
water while the battery cover door is open or otherwise unlatched and
unsecured or permanent damage to the electronics or performance
may occur. Make sure the battery latch is secured closed before use.