Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
Endpoint Installation
If you are using a floor stand for installation, please refer to
(Floor-Mounted).
Take and place all components gently to avoid damage.
We recommend 2 people working together to mount ETV65, 4 people working together to mount ETV86.
1
Determine wall-mounted bracket (a) installation position
1.
Please install on a vertical, load-bearing solid wall or concrete wall (use expansion
screw) or planks, other reinforced walls (use self-tapping screws) with more than
20 cm thickness.
2.
For other type of walls, please reinforce the wall and verify the feasibility before
installation. Verification method: Install a screw to carry out a single screw load
test for 1 minute (ETV65 load-bearing 35 kg, ETV86 load-bearing 45 kg), and the
installation can continue if the screw is not loose.
3.
The wall-mounted bracket for ETV65 and ETV86 are only different in size, and the
installation method is the same.
4.
The installation height data is for reference only. You can choose a suitable posi-
tion as needed.
ETV65
1490mm (65 inches)
1968mm (86 inches)
ETV86
2
Quick Start Guide
97mm
26mm
Werbung
Inhaltsverzeichnis
