De-Installation Of The Control System - +GF+ Neoflow Betriebsanleitung

NeoFlow pressure reducing valve
7.4

De-installation of the control system

1. Remove the valve from the pipe network.
2. Bring CV into the closed position.
3. Bring KH1 and KH2 into the closed position.
KH2
AS
SV CV
KH1
PU
P1
4. Completely loosen the nuts of the control lines (1-4) to remove the control lines on the inlet and outlets.
4
3
KH2
5. Remove the four bolts from the control block and lift the control system off the main body.
SV CV
KH1
28
P2
PD
2
P2
PD
1
Instruction manual