English - IKEA VARMFRONT Bedienungsanleitung

English

Functions
1. POWER button
2. LED indicators
3. USB-C (charging and supply power)
4. USB-A (only supply power)
Charging power bank
• Connect the USB-C cable to the USB-C port of the power bank first and
then connect the USB cable to a USB-charger or USB-outlet that can
provide sufficient power to charge the power bank. The LED indicators
will display the charging status.
Supply power to devices
• Connect the USB cable to USB-C or USB-A port of the power bank first
and then connect the USB-cable to your device that you want to charge.
• The power bank will detect a connected device and start charging
automatically.
• The LED indicators will display the remaining charge in the power bank
during discharging.
Check power status
• Click once on the POWER button and the LED indicators will light up and
indicate the remaining power status.
• If the USB cable is not disconnected while the charging process finishes,
push the POWER button first to restart the charging.
Small current supply mode
• Press the POWER button for 8 seconds when your device is being
charged.
• The function is mainly used to charge certain wearable electronic devices.
When charging a device that needs a charging current less than 100mA
via a USB-A port, this mode should be activated. You can press the button
for 3 seconds to exit this mode, it also automatically closes after 2 hours.
Good to know
• You can charge up to 3 devices at the same time since the charger has 2
USB-A ports and 1 USB-C port. (Power Delivery and Quick Charge)
6