Need Help - Cudy LT18 Schnelle Installationsanleitung

How to upgrade firmware?
How to upgrade firmware?
1. Download the latest firmware from
2. Unzip the file you download
3. Connect to Cudy's network via WiFi or Ethernet.
4. Open a web browser and go to
5. log in the web management page.
6. Click Advanced Settings -> Firmware.
System Status Quick Setup General Setting
System
Time zone Firmware Backup/Restore
7. Choose the firmware you unzipped to upload.
Firmware Upgrade
Firmware File Path
NO. Mesh Unit
1 Main route
8. Waiting 2～5 minutes for the router restart.
9. Done
https://www.cudy.com/download
http://cudy.net/ or http://192.168.10.1/
Advanced Settings
Diagnostic Tools
Admin Account Language
Browse...
Model Firmware Version
XXXX 1.11.0
— 7 —

Need Help?

Q1. What should I do if I cannot access the web management page?
A1: If the computer is set to a static IP address, change its settings to obtain an IP
address automatically.
A2: Make sure http://cudy.net/ or http://192.168.10.1/ is correctly entered in the
web browser.
A3: Use another web browser and try again.
A4: Reboot your router and try again.
A5: Disable and enable the active network adapter in use.
Q2. How do I restore the router to its factory default settings?
A1: With the router powered on, press and hold the RESET button for 6 seconds
before release. Wait the router resets.
A2: Log in to the web management page of the router, and go to
Advanced Settings >Reset , click Perform Reset and wait until the reset process is
Timed Restart
complete.
Q3: What can i do if i meet other problems?
A1: Find answers on https://www.cudy.com/faq
A2: Contact cudy technical support team via email: support@cudy.com
A3: Contact cudy technical support team via Skype: support@cudy.com
— 8 —
EN