FLINQ FQC8269 Handbuch Seite 3

EN Manual
Notes:
- Do not open the device yourself.
- This device is not a toy, keep it away from children!
- Do not use with appliances that could cause any fire in unattended use
(like irons etc.).
- Any other use as the intended way for this device is not validated for
any warranty or liability.
- This device is only used for domestic and private use!
- Do not use the device excessively and do not store them under heavy
pressure. The device is not resistant to heat and water.
- Avoid rain, dampness or contact with other liquids
Specifications
Color Bamboo
Material ABS plastic + Bamboo
Input power DC 5V 10W, or 9V 18W (DC to AC 230V
USB QC3.0 adapter included)
Wireless charging input power DC 5V / 2A (10W) or 9V /1.67A
(15W Max)
Wireless charging output power 10W, 7.5W and 5W
Wireless efficiency > 81%
Buttons yes at back side to control several
functions and settings
Temperature Sensor yes built in
Operational temperature -15 ~ 55 degrees
Power 10W
Light brightness lumen warm white 30lm, white 50lm and cool
white 30lm
Product size 15 x 7 x 7 cm
Weight 240g
This product is a clock + charger product. It is developed for giving date and
time and the possibility for wireless charging at the same time. Read and follow
the instructions contained in this manual carefully. Keep these instructions
at a safe place for future reference. Dispose of packaging material to local
applicable regulations. The operating life of the product will be less if the
ambient temperature is higher than 45°C or lower than -10°C.
Main use cautions before first use
- Choose a stable, solid and supportive surface and make sure the clock is
set correctly.
- Do not place or immerse the clock under water like pools and ponds! It is
not waterproof.
- Make sure the cables cannot cause a trip hazard.
- This device is intended for inside use only.
- This is not a toy, keep it away from children below 12 years.
- Do not open or disassemble the device yourself, this will void the warranty
at all times.
- Do not disassemble, repair or modify the product by yourself as this may
result into an electric shock.
- The led lamp source is not replaceable.
- If the cable is damaged or broken please contact your seller for correct
replacement by the manufacturer only.
- Do not stand, sit on, jump or throw with the device at all times.
- Do not throw this product in the air to avoid damage caused by falling.
- Only use the device for its intended designed use.
- Take good care of the product and clean it regularly.
- Never touch the plug contacts with sharp or metal objects.
- Use only the original supply and original accessories.
- Protect the device from special liquids and vapors
- Please note that the power USB port of the device should not have water
infiltration. Otherwise, it will cause a product failure.
- Do not charge or store the product in a place below 0°C or above 40°C ,
otherwise the product performance will be reduced.
Read and follow all the safety instructions
- Do not install/use/throw near a gas, electric radiator, fireplace, candles, or
other sources with a similar heat or explosion/flammable liquids and gasses.
- Damage from this housing/ device can cause explosion and/or fire.
- Do not staple, nail, or hook the power cable.
- Never touch the plug contacts with sharp or metal objects.
- Do not hang the device only by the electric cables.
- An electric product is not a toy! To avoid the risk of fire, burns, injuries or
electric shock, the power cable should not be left within the reach of children.
- Do not use the product outside its intended use.
- Do not hang ornaments or other objects on the device cables.
- Do not close windows and doors on the power cord so as not to damage
the insulation.
FlinQ Wireless QI Clock