Safety-Technical Controls; Malfunctions; Conformity To Safety Standards - Med-fit 3 Plus Bedienungsanleitung

SAFETY-TECHNICAL CONTROLS

For safety reasons, review the following checklist before using your Med-Fit 3 Plus TENS/EMS
1. Check the device for external damage.
- deformation of the housing.
- damaged or defective output sockets.
2. Check the device for defective operating elements.
- legibility of inscriptions and labels.
3. Check the usability of accessories.
- patient cable undamaged.
- electrodes undamaged.
- Battery is not corroded

MALFUNCTIONS

Should any malfunctions occur while using the Med-Fit 3 Plus TENS/EMS, check
- whether the parameters are set to the appropriate form of therapy. Adjust the control correctly.
- whether the cable is correctly connected to the device. The cables should be inserted completely into the
sockets.
- whether the LCD reveals the menu. If necessary, insert a new battery.
- for possible damage to the cable. Change the cable if any damage is detected.

CONFORMITY TO SAFETY STANDARDS

The Med-Fit 3 Plus TENS/EMS devices are in compliance with the following standards:
EN60601-1:2006/A1:2013 Medical electrical equipment -
Part 1: General requirements for basic safety and essential performance
EN60601-1-2:2015 Medical electrical equipment -
Part 1-2: General requirements for basic safety and essential performance –Collateral
Standard: Electromagnetic disturbances - Requirements and tests
17