Cleaning And Maintenance; Error Code Descrip�On - Merax Ed40 Allgemeines Benutzerhandbuch

change within 5s, the set value will be automa�cally saved.
6. Refrigerator L and R temperature zones closing se�ng
(L and R temperature zones cannot be closed synchronously)
L and R temperature zones are closed respec�vely: (L and R temperature zones cannot be closed at
the same �me)
When se�ng the temperature, the L temperature zone flashes. Press " " key, and the L
temperature zone closes to display "OFF". Press " " again to display the normal temperature
value.
A�er pressing " " key again, the R temperature area flashes. Press " " key to close
the R temperature area and display "OFF". Press " " again to display the normal
temperature value.
7. Drainage plug func�on: convenient drainage, odor removal.
8. USB charging parameters: 5V / 1A

Cleaning and Maintenance

Before cleaning, it is necessary to disconnect the power supply, and wipe the inner and outer
surfaces of the refrigerator with a cleaning cloth dipped with an appropriate amount of water or
detergent. It is not allowed to wash with water directly to avoid damaging electrical components.
When the refrigerator is not used for a long �me, it is necessary to clean the inside and outside of
the refrigerator and keep it dry, and take moisture-proof and dust-proof measures to avoid mildew
and peculiar smell inside the refrigerator.
Error Code Descrip�on
When the compressor, module, fan and temperature sensor are abnormal and the input voltage is
too low, an error code will appear on the display screen, and the compressor will stop working. A�er
the abnormality is eliminated, unplug the power supply and plug it in again, the temperature in the
refrigerator can be displayed normally, and the compressor cooling mode will start to work a�er 1
minute.
17