NTools PWW 400 Betriebs- Und Wartungsanleitung Seite 10

Inserting the cartridge of sprayable single-component sealant
1) Remove the cover of the bottom of the
cartridge with the salts it contains.
2) Break the membrane to let the
product come out.
Inserting the cartridges of sealants and adhesives for windows
( See points 1 and 2 )
5) Cut the nozzle fitted on the cartridge
to suit your requirements.
3) Screw the nozzle (7) onto the cartridges
and fit it inside the gun after removing the
front ring-nut.
4) Put the external nozzle on the gun and
lock it in place.
6) Put the cartridge onto the adapter (4),
insert the whole cartridge in the gun and
tighten the ring-nut.
10