Pushing Aid - Derby cycle Xion SMMI Connect Kurzanleitung

Bild 8: Standard-Screen 3
Figure 8: Standard screen 3
Bild 10: Schiebehilfe aktiv
Figure 10: Pushing aid active
• Ø km/h: Average speed on the current tour
• Tot.-km: The total mileage of the motor
• A: Current power consumption
• Eco, Tour oder Boost: selected riding mode. You can find out
how to change this riding mode in the next section
CHOOSING THE ASSISTANCE LEVEL /
RECUPERATION LEVEL
Use the Up/Down button on the remote control to adjust the
levels of assistance or enable recuperation. Please note that
recuperation can only be activated with a partially discharged
battery (charge status < 90 %), at a battery cell temperature
above 0 °C and at speeds of 10 – 28 km/h.

PUSHING AID

Pushing aid can be activated by holding down the top button for
two seconds.
TOUR RESET
If you press and hold the bottom button for at least two
seconds, the tour data is reset to zero.
9