Antenna Connection; Antenna Placement - Alphatronics AN 1 Bedienungsanleitung

INSTALLATION
Notice:
For the best reception, please check the following conditions.
1. Keep the antenna away from the sources of interference, such as
air conditioner, elevator, hair dryer and microwave oven... etc.
2. Place the antenna near windows when using the antenna in
indoor environments.
3. If there is interruption between antenna and transmission tower, it
will cause the signal loss.

Antenna connection:

Step 1: Take out the AN 1 main unit from the packaging.
Step 2: Connect the attached coaxial cable to a digital TV receiver (or TV).
Step 3: Activate the DC 5V power function to the antenna from the
digital receiver (or TV). Please check with the manual of the
digital receiver (or TV).
Step 4: Check the signal quality. If you can not get a acceptable signal
reception, please try to put the antenna in different position.

Antenna placement:

Before the following step, please make sure that you have the correct
protection when you drill on wall.
6 E/English
Wooden wall mounted installation:
Step 1: Mark the fixing position with a pencil or pen (please use the
holder to mark the position).
Step 2: Take out the attached screws, using screw driver to fix these
screws through the holder and fix it on the wall.
Step 3: Fix the main unit on the fixing holder.