FUAVE VV1010 Bedienungsanleitung Seite 31

• RISK OF ELECTRIC SHOCK! Only use the appliance's factory-fitted
plug and never change it. The plug must match the type of socket
used to reduce the risk of electric shocks.
• RISK OF ELECTRIC SHOCK! Do not remove the earth contacts from
the plug.
• RISK OF ELECTRIC SHOCK! Never pull the power cable to carry or
move the appliance or to disconnect the plug. Keep the power cable
away from heat, oil, sharp edges or corners and moving parts. Do
not make any changes to the power cable or submerge it in water or
other liquids. Do not turn or kink the power cable, do not roll up the
power cable too tightly after use and do not wind it up around the
appliance; this may damage the insulation layer! Damaged or
tangled power cables increase the risk of electric shocks.
• RISK OF ELECTRIC SHOCK! Do not touch the appliance, plug or
mains cable with wet or damp hands.
• Fully unroll the appliance's power cable before plugging it into the
socket. This is to prevent heat generation in the cable.
• Do not pass the power cable under a carpet or cover it with mats,
runners and the like. This can lead to unforeseen heat generation.
• Regularly check the appliance for damage to the power cable and
plug. If there is visible damage, a strong smell, or parts become
excessively hot, stop using it immediately and remove the plug from
the socket.
• It is not permitted to open, change or repair the appliance yourself.
Do not drill holes into the appliance anywhere to avoid dangerous
situations. The appliance, plug and/or cable must be repaired and/
or replaced by an electrician or an equivalent qualified person.
Repairs by amateurs invalidate the guarantee and can cause
dangerous situations!
USER MANUAL 31