Eldom klippy WG20 Bedienungsanleitung Seite 10

OPERATING INSTRUCTION
EN
DESK FAN WG20
• GENERAL DESCRIPTION
1. Propeller
2. Protective mesh - front
3. Protective net - rear
4. Housing
5. On/off and 1, 2 speed switch
6. Fixing clip
7. Base
8. Head tilt adjustment
• TECHNICAL DATA
− power: 15W
− supply voltage:
220-240V~ 50/60Hz
•
INTENDED USE
The WG20 fan is designed to
improve thermal comfort in living
spaces. Thanks to the universal
design, it can be attached to flat
surfaces, e.g. a desk top, using a clip.
• ASSEMBLY
− Before use, check that the device is complete and
not damaged.
− Before using the device for the first time, unpack and
assemble the individual components.
− Connect the housing (4) with the clip (16) and lock it
with the screw (8) - fig.
− Install the clip (6) in the base (7).
− Place the folded device on a stable and level surface
− Loosen the screw (8), set the angle of inclination of
the bowl, and then lock it by tightening the screw (8).
− Unwind the cord completely.
− The device can also be attached to flat surfaces, e.g.
a desk top, using the clip (6).
10
INSTRUCTION MANUAL
STAND FAN WG20