Storage; Cleaning And Maintenance; Important Advice; Recycling And Disposal - Active Era AB-K3 Bedienungsanleitung

surrounding temperatures consistent during use.
• Puncture: Your air bed may be deflating because it has a puncture.
How do I find a puncture?
To find a puncture, please follow these steps:
1. Fill a spray bottle with soapy water e.g. washing up liquid.
2. Inflate your air bed fully and unplug the power cord from the mains power supply.
3. Spray the surface of the inflated air mattress, avoiding the air pump and
electrical components.
4. Visually inspect the air bed. If there is a puncture, bubbles will start to form
over the puncture as air starts to leak out.
5. Wipe your air bed dry with a soft dry cloth.
6. Repair your puncture with the provided puncture kit.
Can I use a car lighter to inflate my mattress?
To inflate your air bed, the power cord needs to be plugged into an electrical
outlet. If electrical power is not available, then a conventional manual operated air
pump can be connected to the airbed. If you have a plug converter then you may
be able to use the cigarette lighter, however this may not always work as the air
bed is designed to be powered by standard UK mains electricity.

STORAGE

1. Choose a flat surface large enough to accommodate the inflated air bed.
2. Remove any sharp or pointed objects on or near the surface.
3. Lay the air bed out with the flocked surface touching the floor.
4. Remove the screw cap and rubber bung from the top of the integrated foot
pump and place safely to once side.
5. Standing with your foot on top of the integrated foot pump press down and lift
up in a repeating motion to inflate the air bed to the desired firmness.
6. Replace the screw cap and rubber bung ensuring that the fit is secure.
7. Turn the air bed over so that that non-flocked surface is touching the floor.
8. The air bed is now ready for use.
9. Store the air bed in a safe, clean and dry place, out of reach of children when
not in use.

CLEANING AND MAINTENANCE

WARNING: Always turn the appliance OFF and unplug the power cord
from the electrical outlet before handling or cleaning it.
10 | English
CAUTION: Do not allow water or other liquids to run into the interior of
the air pump, as this could create a fire and/or electrical hazard.
CAUTION: Do not use any abrasive cleaners or solvents, as this will dam-
age the air bed.
• Do not attempt to clean the appliance in any other way than that detailed by
the manufacturer.
• Clean the exterior surface of the appliance by wiping it with a soft, damp cloth.
Dry the appliance with a soft, clean cloth.
• Clean the vents and openings of the appliance regularly with a vacuum
cleaner, using the brush attachment to avoid any dust build-up.
• To store your product, we recommend using the original or a similar-sized box.
• Store the appliance in a safe, clean and dry place, away from direct sunlight
and out of reach of children when not in use.
• To extend the lifespan of the filter, a vacuum cleaner, using the brush
attachment can be used to remove dust from the surface of the filter.

IMPORTANT ADVICE

The ambient temperatures of air have an effect on the air bed internal pressure. At
low ambient temperatures the air will contract within the air bed and the air bed
will feel softer: add air as necessary. At high ambient temperatures the air within the
air bed will expand significantly and the air bed will become hard and may burst:
release air to avoid damage to the air bed or to soften the feel. Do not expose the
air bed to extreme temperatures.
Air inside of air bed may expand and contract with varying temperatures leading to
reduced pressure inside of air bed. If this occurs, simply add more air issuing the
pump to achieve desired firmness.
Stretching is a natural characteristic of new vinyl. During initial use, the air bed may
become soft and require additional inflation to maintain desired firmness. This is
normal for the first few days of use.
Under no circumstances will Active Era be liable for damages to the air bed
caused by negligence, ordinary wear and tear, abuse and carelessness or external
forces.

RECYCLING AND DISPOSAL

Waste electrical and electronic products (WEEE), batteries, accumulators and
packaging should not be disposed of with general household waste. This is to
prevent possible harm to the environment and human well-being, and to help
conserve our natural resources. Most electrical products with a plug, battery,
or cable can be recycled. Contact your local council, household waste disposal
service, or the store where you purchased the product for information regarding
English | 11