Perel SCAMSET8 Bedienungsanleitung Seite 9

The system will only scan the QR code once. Press the reset button for 5 seconds
7. Add the door phone in the list.
a. Slide down to refresh and find the door phone.
b. Tap to add the door phone.
c. Enter the door phone's name.
d. Enter your password, confirm and tap [Save].
10. Wifi Connection through a Network Cable
If connecting through scanning the QR code does not succeed, please connect
1. Connect the door phone to the router using an LAN cable.
2. After registration, search the door phone in the device list.
a. Slide down to refresh and find the door phone.
b. Tap to add the door phone.
V. 03 – 25/02/2016
SCAMSET8
and restart the scanning procedure.
the wifi through a network cable.
9 ©Velleman nv