Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.3 Connecting the audio playback device
Connect the audio output ports on the product to the audio playback device using suitable
audio cables.
1. (If the input signal carries 5.1CH audio) connect the audio output ports SW / CEN / SR /
SL / FR / FL to the audio playback device.
2. (If the input signal carries 2CH audio) connect the audio output ports FR and FL to the
audio playback device.
7.4 Connecting headphones
1. Connect headphones to the headphones port on the product.
8 Operation
1. Connect the USB cable to the power port DC/5V on the product and the other end to
a suitable USB power source (5 V/DC, min. 1 A).
The power indicator light will illuminate.
Æ
2. (If the input signal carries 5.1CH audio) move the audio output switch into the position
5.1CH.
If the audio input signal carries 5.1CH audio, the 5.1 channel input indicator IN 5.1
Æ
lights up.
3. (If the input signal carries 2CH audio) move the audio output switch into the position 2CH.
4. Adjust the volume using the volume adjustment dial. Rotate the dial in a clockwise direction
to increase the volume, and anti-clockwise to decrease the volume.
9 Troubleshooting
Problem
Suggested solution
No power connection
Check if power is connected.
No audio output
Check the audio connections.
Check that the volume is not muted on the product.
Check that the volume is not muted on the playback device.
Noise
Check all connections and interfaces for loose connections.
Check the condition of the cables.
10 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
11 Disposal
11.1 Product
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
12 Technical data
Input voltage ................................. 5 V/DC via USB
Input current ................................. min. 1 A
HDCP support .............................. HDCP 1.4
HDMI resolution ............................ 2160p / 30Hz; 1080p / 50/60 Hz; 1080i; 720p; 1576i; 480i
as specified by HDMI 1.4b
Support video colour format ......... 24 bits; deep colour 30bit; 36bit
Audio output ................................. 2CH; 5.1CH analog
Audio max bandwidth ................... 340 MHz
Max baud rate ............................... 10.2 Gbps
Input/output TMDS signal ............. 0.5 - 1.5 V p-p (TTL)
Input/output DDC signal ............... 5 V p-p (TTL)
Support audio format .................... MP3; AC3; DTS; WAV; WMA; AAC; ALAC; FLAC; APE;
OGG; M4A
Signal noise ratio .......................... 120 dB
Stereo isolation ............................. 80 dB (1 kHz)
Channel unbalance ....................... 0 dB
Sampling rate ............................... 32 to192 kHz
Bit rate .......................................... 16 to 24 Bit
Response frequency ..................... 20 Hz to 20 kHz / ±0.7 dB
THD .............................................. 20 Hz to 20 kHz / 0.25 - 0.065 %
THD+N ......................................... 1 kHz / 0.15%
12.1 Environment
Operating temperature ................. 0 to +70 °C
Operating humidity ....................... 10 – 80 % RH (non-condensing)
Storage temperature ..................... -10 to +80 °C
Storage humidity ........................... 5 – 90 % RH (non-condensing)
12.2 Other
Dimensions (W x H x D) ............... 138 x 21 x 96 mm
Weight .......................................... 182 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
*2617146_v1_1122_02_DS_m_4L_(1)
Werbung
Inhaltsverzeichnis
