Speaka Professional SP-HAE-300 Bedienungsanleitung Seite 3

Operating Instructions
SP-HAE-300 HDMI audio extractor
Item No. 2617146
1 Intended use
This product auto converts HDMI input to 5.1 channel analog audio output, and supports
decoding Dolby AC-3/DTS (including 5.1 RAW digital audio streaming).
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI
Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
2 Delivery content
1 x Decoder
1 x USB cable
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 General information
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
Turn off the unit when it is not in use for a long period of time.
Do not remove any covers from the product and do not touch internal components.
Use the original factory supplied power adaptor with this product.
5.2 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
5.3 Operating environment
Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room
temperature before you use it.
Never operate the product in direct proximity of strong magnetic or electromagnetic fields
or transmitter aerials or HF generators. Doing so can prevent the product from functioning
properly.
1 x Operating instructions
www.conrad.com/downloads or scan the QR code
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the appliance.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
6 Product overview
1 2
7 8 9
1 HDMI input port 6 Volume adjustment
2 Headphone output port 7 Heavy bass output port
3 Audio output switch 8 Middle output port
4 5.1 channel input indicator 9 Post position left/right
output port
5 Power indicator light
7 Connecting devices
RCA
cable
Sound system
TV
HDMI output cable
Power adapter
Power adapter
RCA
cable
5.1CH Sound system
TV
HDMI output cable
Power adapter
Power adapter
7.1 Connecting the video and audio source device
1. Connect an HDMI cable to the video source device (for example, a Blu-Ray DVD player or
games console) and the HDMI input port HDMI IN on the product.
7.2 Connecting the video display device
1. Connect an HDMI cable to the HDMI port on the HD display (for example, a HD TV or
monitor) and the HDMI output port HDMI OUT on the product.
3 4 5
9 10 10 11
10 Front left/right output port
11 HDMI output port
12 Power port
In the 2CH Mode
3.5mm Audion
cable
HDMI input cable
Blu-ray
DVD
In the 5.1CH Mode
3.5mm Audion
cable
Headphone
HDMI input cable
Blu-ray
DVD
6
12
Headphone
PS4
PS4