XINDA T-388 Benutzeranleitung Seite 9

9. VOX Selection
The Radio's is capable of voice activated (VOX) transmission. In
VOX mode, the radio will transmit a signal when it is activated by
your voice or other sound around you. VOX operation is not
recommended if you plan to use your radio in a noisy or windy
environment.
Note:VOX mode will be overridden when you press the TALK - button
"15" .
• Press the MENU- button(11) three times, the current VOX setting
flashes on the display and the VOX icon is displayed.
• Press -button(4) to set the VOX sensitivity level between 1 and 3
(level 3 is the most sensitive level).
• Press -button(7) until "OF" appears on the display,to turn VOX
OFF.
• Press the TALK-button(15) to confirm and return to stand-by mode.
10. Scanning for an active radio channel
• Press the SCAN -button(21) : The 'Scan' function indicator (17) will
appear on the screen and the channel (18) will scan continuously from 1 to
8.
• Press the -button(7) to start the channel scan from 8 to 1.
Once an active channel is found, the scanning will stop and you can
listen to the transmission.
When the transmission on the found channel stops, the scanning will
resume automatically.
NOTE:If you press the TALK button(15) while listening to a found
channel, the walkie talkies will go back in stand-by mode on the found
channel.
９