XINDA T-388 Benutzeranleitung Seite 6

BEFORE USE (Pic 02)
To insert batteries into the devices, first remove the belt attachment: lift
the attachment clip (23) and press the belt attachment upwards (24).
Open the battery compartment (26) and insert 4 AAA batteries (25) (not
supplied), ensuring that the poles are correctly aligned. Then close the
lid.
USING THE TWINTALKER
1. Turning the device on/off: To turn the devices on or off, hold
down the on/off button (6) for 3 seconds a BEEP sound will be
played to confirm.
2. Adjusting the volume: To increase the volume, press the Up
adjuster button
volume.
Note: The volume level (3) is displayed on the screen.
3. Battery Charge Level/Low Battery Indication
The battery charge level is indicated by the number of squares
present inside the battery icon on the LCD Screen.
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
When the battery charge level is low, the battery icon will flash and a beep
will be heard to indicate that the batteries need to be replaced or recharged.
(4) and press the Down (7) button to decrease
６