Eicon Technology DIVA USB Benutzerhandbuch Seite 14

Finally, a screen summarizing the configuration is displayed. If you kept all
12.
the default values, the following items are installed:
• Eicon channel 0 and Eicon channel 1 (one device for each B-channel).
• V.120 modem (this modem is used to connect to CompuServe
remote sites over ISDN).
• CAPI 2.0 is installed (CAPI 2.0 allows you to use ISDN applications that
require a CAPI driver). You should make sure that this item appears if you
want to use RVS-COM, which requires a CAPI driver.
Click 'Finish'.
13.
The setup program copies files to your computer.
If you are prompted for the 'Setup' disk: Click 'OK'. Make sure that the
14.
DIVA Client Software Suite CD-ROM is in your CD-ROM drive. In the
'Copying Files' dialog box, type:
D:\WIN_9X\INSTALL\ENGLISH
(where is your CD-ROM drive letter).
D
Click 'OK'.
15. If you are prompted for your Windows 98 CD-ROM: Insert your Windows 98
CD-ROM into your CD-ROM drive. Click 'OK'. If the 'Copying files' dialog
box appears, type the path to the CD-ROM, then click 'OK'.
In the 'Add New Hardware Wizard', click 'Finish'.
16.
If you are prompted to reboot your computer, click 'No'. You do not need to
17.
reboot your computer.
What's Next? The software is installed. You can now connect your ISDN line, as
described on page 15.
14
Installing the Software
®
and certain