Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN User Guide
3.2
Device description
#
1.
Air filter
2.
Pressure vessel
3.
Wheel
4.
Castor
5.
Quick connect (regulated compressed air)
6.
Pressure gauge (set pressure can be read)
7.
Pressure switch (on and off switch)
8.
Pressure regulator
9.
Transport handle
3.3
Delivery contents
Please check that everything is included along
with the item based on the delivery contents
described. In the event of missing parts, please
contact our customer service team no later than
5 working days of purchasing the item, ensuring
that you present a valid purchase receipt.
Open the packaging and carefully remove the
device. Remove the packaging material as well
as packaging and transport locks (if present).
Check the device and the accessories for
transport
damage.
packaging until the end of the warranty period.
4
Safety instructions
Read this user guide carefully before using the
product, in order to familiarise yourself with the
full range of operation. Improper operation can
cause a hazard. Only by completely observing all
safety instructions and information can proper
use be ensured. The manufacturer accepts no
liability for any damage caused by improper or
incorrect use. Carefully keep the safety and
operating instructions for future use. However,
the instructions in this guide are not a substitute
for any standards or other regulations (even
those not prescribed by law) that have been
issued for safety reasons.
4.1
Proper use
• The device must only be used when in perfect
working order and an operationally safe
condition.
• The safety documents for the corresponding
tool must be kept in the immediate vicinity.
STIER Industrial GmbH
If possible,
keep
#
10.
Safety valve
11.
Condensate drain plug
12.
Check valve
13.
Oil filler hole
14.
Oil blanking plug
15.
Oil drain plug/inspection glass
16.
Cylinder
17.
Pressure line
18.
Motor circuit breaker
DANGER
The device and its packaging material are not
plastic bags, films and small parts! This runs the
risk of choking and suffocation!
Air filter
Wheel (x2)
Stand
Oil blanking plug
Assembly materials
the
Instruction handbook/safety instructions
CAUTION
Read all the safety warnings and instructions.
Failure to observe the warnings and instructions
may result in electric shock, fire and/or serious
injury.
NOTICE
The tool has been manufactured in accordance
with the regulations of the EU Machinery
Directive. Improper repairs, the use of non-
original parts and non-compliance with the
safety instructions in the operating manual will
invalidate the EU marking
• Related safety equipment must be checked
regularly.
• Furthermore, the generally valid safety,
accident
prevention
protection regulations for the application must
be observed and complied with.
18
and
environmental
EN
Werbung
Inhaltsverzeichnis
