Inserting The Mixing Bowl; Using The Spray Guard - hanseatic LW-6835G1 Gebrauchsanleitung

Page EN-12 First use
3. Insert the desired mixing attachment
((10), (11) or (12)) from below onto the
mixing shaft (6). Guide the slot of the mix-
ing attachment over the nose of the fitting
pin.
4. Turn the mixing attachment counter-clock-
wise (approx. 1/4 turn).

Inserting the mixing bowl

(13)
(5)
1. Place the mixing bowl (7) into the mount (5)
so that the three tabs at the bottom of the
mixing bowl fit into the recesses in the
mount.
(7)
2. Turn the mixing bowl clockwise until it
engages and is secure (past the point of
resistance).

Using the spray guard

1. Place the cover (8) on the mixing bowl so
0
P
1
2
3
4
5
6
2. Place the filling aid (9) in the slots on the
even while it is in use.
3. Push the lock release lever (2) upwards
4. Push the machine arm down towards the
0
P
1
2
3
4
5
6
0
P 1
2
3
4
5
6
that the opening is at the front.
Slot
(9)
cover.
The filling aid allows you to safely add
more ingredients to the mixing bowl
to unlock the machine arm (1).
mixing bowl until it engages in place.
(8)
0
P
1
2
3
4
5
6