Johnson Klib Bedienungsanleitung Seite 10

SSEMBLY ND USE
Read the description of the parts and
accessories before assembling and using
the appliance.
Motor base
4 Hole for inserting the arm (C3)
of the cup lid
5 Cup shaft (removable)
6 ON/OFF, speed control and
Pulse selector.
C Cup
C1 ccessory for pressing down food
C2 Cup lid
C3 Safety arm
G ccessory pin
D Disc (reversible for 2 functions)
D1 Grating blade
D2 Slicing blade
E Metal mincing blade
F ccessory with plastic wings for
mixing, beating and amalgamating.
J Spatula
Using the cup (C)
- Make sure the shaft of the cup ( 5) is
positioned correctly
- Position the cup (C) on the motor base
( ) so that the three small blocks around
the shaft are inserted into the lodgings
under the cup.
- ssemble the most appropriate acces-
sory according to what is indicated in the
sections:
DISC (D) grate and slice,
BL DE (E) mince,
CCESSORY (F) mix, beat, amalgamate.
On selecting and assembling the most sui-
table accessory, place the lid on the cup.
- Position the lid by centring it on the pin
and rotating in a counter clockwise direc-
tion. Block the three grooves on the lid
onto the three teeth on the cup. Make sure
the safety arm (C3) is inserted into the slot
of the motor base ( 4).
DISC (D) grate and slice,
ssemble the cup according to the instruc-
tions in the chapter "Using the Cup (C)".
Insert the pin (G) into the centre of the
reversible disc (D).
To grate, the grating blade (D1) of the disc
(D) must be facing upwards.
To slice, the slicing blade (D2) of the disc
(D) must be facing upwards.
Let the three teeth of the pin enter the
three grooves of the disc and then turn
the disc and pin in opposite directions
until they are securely locked into place.
Position the disc+pin assembled on the
shaft of the cup ( 5). Close the lid accor-
ding to the instructions described above.
Introduce the food into the cup by delica-
tely pressing it towards the blade with the
food-pressing accessory (C1).
Never use your fingers or other objects.
Start rotating the disc (D) by turning the
selector ( 6)
On completion of the processing, place
the selector ( 6) on the "0" position.
Turn the lid in a clockwise direction to
remove the safety arm (C3) from the slot
of the motor base ( 4).
Rest the cup on a stable surface before
completely removing the lid and retrieve
the accessory used.
Be careful when handling the blades of
the accessory used.
Pour the processed food and thoroughly
wash the accessories and cup.
BL DE (E) mince,
ssemble the cup according to the
instructions in chapter "Using the Cup
(C)".
Carefully remove the plastic protection
from the blades (E).
Insert the blades (E) into the pin (G) by
pushing downwards, so that the base of
the blades coincide with the base of the
pin.
10