All Blinds In The Selected - Motion CM-12 Handbuch

All blinds in the selected

6.3
channel will start stepping,
indicating program mode has
been activated. All blinds can be
copied to a new channel on the
same remote or other remote.
Select a new channel on the
(new) remote.
Press the pair button
6.4
on the (new) remote to
pair the blinds with the
new channel.
6. CHANNEL SELECT 5 CHANNEL REMOTE
To exit channel select,
6.5
go back to the channel
selected at step 6.1
and repeat step 6.2
15