Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY
Scooter assembly
A - Unfolding the steering column
Open the rapid tightening lever (11), then push the locking lever forward (5) to
unlock the folding mechanism (10). Then lift up the steering column (9) until it
reaches the vertical locking position (you should hear a "click" of engagement),
then firmly tighten the rapid tightening lever (11).
B - Positioning the handles
Take the two handles (1) out of their plastic cover, insert them into the right and left
parts of the stem(7).
For each of the two handles, you should hear a "click", indicating that the handles
are engaged (1). Check that the two spring buttons (6) are effectively out and visi-
ble.
The scooter with suspension, open the handle quick-release lever (2) and follow
the instructions below before tightening it firmly.
C. Adjusting the handlebar height
Open the steering column rapid tightening lever (8), adjust the height of the han-
dlebars until you hear a "click", indicating engagement in one of the two indexed
positions, then firmly tighten the steering column rapid tightening lever (8).
Werbung
Inhaltsverzeichnis
