AutoFull AF083 Installationsanleitung Seite 7

1
2 3
1 2 3
Spare screw for footrest slider
1
配件表
（M6x16mm） x1
Accessories table
recliner adjuster screws
备用螺丝 （M8×30mm） ×1
4
3
（M5×16mm） ×3
01
Align the C-shaped notch of the base arm with the column at the edge of the base core,
move upward to buckle, and install 5 base arms in sequence
3 11
4
4 5 6
5
Spare screw for armrest surface Spare screws
2 备用螺丝 （M8×20mm） ×1 3 扳手×2
（M6×16mm） ×1 （M8×25mm） ×2
2 5
Wrenchx3 Rubber bandx3
调角器螺丝 （M5x16mm） x2
5 6
4
02
Put the base face up and press down firmly on the base core
03
Insert the chair wheel into the base
05
Unscrew the backrest screw and place the backrest as shown
04
Insert the Cylinder into the base
06
Backrest screw hole
screw hole of the cover
of recliner adjuster
Backrest screw hole
Fix the backrest with backrest screws(Note: first align the upper holes of the main recliner
adjuster
（Note: first align the upper holes of the main recliner adjuster (the side with the handle), and then tighten
the 4 backrest screws in sequence）
12