Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CORDLESS ROUTER TRIMMER SAFETY
PRECAUTIONS
1. Hold power tool by insulated gripping surfaces, because
the cutter may contact hidden wiring. Cutting a "live"
wire may make exposed metal parts of the power tool
"live" and shock the operator.
2. Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding the
work by your hand or against the body leaves it unstable
and may lead to loss of control.
3. Wear hearing protection during extended period of
operation.
4. Handle the trimmer bits very carefully.
5. Check the trimmer bit carefully for cracks or damage
before operation. Replace cracked or damaged bit
immediately.
6. Avoid cutting nails. Inspect for and remove all nails from
the workpiece before operation.
7. Hold the tool firmly.
8. Keep hands away from rotating parts.
9. Make sure the trimmer bit is not contacting the
workpiece before the switch is turned on.
10.Before using the tool on an actual workpiece, let it run
for a while. Watch for vibration or wobbling that could
indicate improperly installed bit.
11.Be careful of the trimmer bit rotating direction and the
feed direction.
12.Do not leave the tool running. Operate the tool only
when hand-held.
13.Always switch off and wait for the trimmer bit to come to
a complete stop before removing the tool from
workpiece.
14.Do not touch the trimmer bit immediately after operation;
it may be extremely hot and could burn your skin.
15.Do not smear the tool base carelessly with thinner,
gasoline, oil or the like. They may cause cracks in the
tool base.
16.Use trimmer bits of the correct shank diameter suitable
for the speed of the tool.
17. Some material contains chemicals which may be toxic.
Take caution to prevent dust inhalation and skin contact.
Follow material supplier safety data.
18. Always use the correct dust mask/respirator for the
material and application you are working with.
Collet: Φ6/8mm
2PCS 5.0Ah Battery pack
1PC 4.0A Battery charger
- 5 -
Werbung
