Overheating Protection - SOLIS SWISS PERFECTION 443 Bedienungsanleitung

CLEANING YOUR DRYER
Before cleaning, disconnect the appliance from the mains. Never immerse the appliance in water.
Please remember to clean the air intake slot regularly with a brush to remove dust and hair from the
air inlet grill. You can clean your appliance with a slightly damp cloth and dry it with a soft cloth.
DETACHABLE AIR INLET GRID
The hairdryer is fitted with a detachable air-inlet grid. To free the appliance of sucked-in hair and dust,
remove the air inlet grid by rotating it slightly to the left. The air inlet grid can be cleaned with e.g. a
brush. When cleaning is finished, rotate the air-inlet grid back onto the hairdryer by rotating to the right.
The filter must never under any circumstances be replaced when wet. Never use the
hairdryer without air inlet grid attached. Regular cleaning will significantly prolong the service life of
your hairdryer.

OVERHEATING PROTECTION

The appliance is equipped with a safety thermostat. lt will switch itself off automatically if it overheats.
After a short cooling-down period, the appliance will come back on again automatically. Always check
that the air intake and outlet points are completely unobstructed.
DISPOSAL
EU 2002/96/EC
Information for correct disposal of the product in accordance with the European
Directive 2002/96/EC
At the end of its working life this equipment must not be disposed of as an household waste. It must be
taken to special local community waste collection centres or to a dealer providing this service. Disposing
of electrical and electronic equipment separately avoids possible negative effects on the environment
and human health deriving from an inappropriate disposal and enables its components to be recovered
and recycled to obtain significant savings in energy and resources. In order to underline the duty to
dispose of this equipment separately, the product is marked with a crossed-out dustbin.
SOLIS reserves the right to carry out technical and visual changes and modifications to improve the
product at any time.
This item stands out due to its long-life cycle and reliability. Despite this though, if a malfunction ever
occurs, simply give us a call. Often a breakdown can be easily and quickly remedied with the right
tip or technique without having to straight away send off the device for repair. We will give you all
the advice and practical support you require.
30
Solis_SwissPerfection-Typ443-Betriebsanleitung.indd 30 Solis_SwissPerfection-Typ443-Betriebsanleitung.indd 30
SOLIS HELPLINE:
091 802 90 10
(Only for customers in Switzerland)
14.11.19 16:48 14.11.19 16:48