Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The A1200 LED connector shares the middle pin of the C64 LED connector. The Floppy-LED
shows scroll lock status (labelled „F.Disk" on A1200) and the H.Disk-LED shows numlock status
(labelled „Disk" on A600). Never connect power to the A600 LED connector!
You do not need drivers for using Keyrah V3 on a Mac, PC or Raspberry Pi. Just plug it in, and
driver installation will happen automatically (if required at all).
Switch settings
The switch chooses between two key mappings: "down" selects a layout that is suitable for
everyday PC tasks, "middle" selects a layout suitable for emulators like VICE (Commodore 8-bit),
WinUAE (Amiga) and Steem (Atari ST).
For the detailed key mapping of each keyboard, please download the full manual from our wiki at
http://wiki.icomp.de/wiki/Keyrah_V3
The third non-latching switch position „up" has two functions: a short press will press the key that
enters the emulator menu or releases input capturing (usually F12). A long press will send the
ACPI-sleep signal to the computer. To make sure that you really want to execute this, you must hold
this position for at least five seconds.
Joysticks
The joystick ports support DE9 "Atari" joysticks or Commodore Paddles, which will appear as
regular HID game controllers.
Technical hints
Keyrah is a USB-only device. Connection to a PS2 port with an adapter is not possible.
Keyrah V3 offers more options and features than can be described in this short manual - please
download the full manual from our wiki at
http://wiki.icomp.de/wiki/Keyrah_V3
To get further help, please visit our support forum at https://forum.icomp.de.
Please understand that we can not provide any support via email.
Werbung
