Quipon Solar 100 Benutzerhandbuch Seite 25

First level search interface
Battery voltage
Error code
NOTE:
1. Press briefly, to scroll down; on all pages except the battery voltage page, press
briefly, to scroll up.
2. On the battery page, press
3. Restore factory settings: Press
seconds.
Second level search interface
Boost charge voltage Trickle charge
NOTE:
1. Bring up the second level search screen by long-pressing button
interface of the first level search screen. The second level search screen will automatically
exit after 10 seconds of inactivity
2. In the corresponding interface, the parameters are displayed by long-pressing
changed by short-pressing
again.
3. The charging and discharging parameters can only be set if the battery type is USR.
Ambient temperature
briefly, to switch the load on/off.
in the "ambient temperature" screen for longer than 3
Low voltage shut-
voltage
Temperature compen-
Load mode
sation module
or . Then save the parameters by long-pressing
- 25 -
Low voltage recon-
down nection
Battery type
in the battery voltage
and