First Start - FOGAL Alaska Energy-Serie Gebrauchsanweisungen

adjust the special 100 mm feet supplied with the castors (6 feet for
I
240, 300 and 360 mm cabinets).
Once the displayed products have been placed in the refrigerated
cabinet it is necessary to adjust the feet again, especially in case of
heavy goods.
Please note that during the operations described in par. 6, the oper-
GB
ator in charge must assure that no authorized people or no properly
protected people respect the safety distance from the cabinet, es-
pecially during the removal and the fixing of the metallic supports.
6a. Electrical connection
Be sure that the electrical system of the place where the cabinet has
F
to be installed complies with the regulations and the security codes
in force.
The power supply of the cabinet has to be independent from other
supplies and protected with a proper insulation.
It has also to be protected with obligatory earthing.
The maximum allowable system impedance is Zmax=0,049 W
D
Please check with the energy supply authority the maximum elec-
tricity grid impedance value. This value does not have to exceed the
maximum allowable system impedance.
Please follow tension and frequency instructions shown on the la-
bel on the back of the cabinet.
NL
36

7. FIRST START

To start an integral cabinet up is enough to connect the plug with
the socket.
The on/off light switch and the on/off power switch (where provid-
ed) are integrated into the touch interface of the electronic control-
ler. Refer to the attached document 'on-off lights and on-off cabinet
instructions'
The electronic display is set to guarantee a proper working based
on the class temperature of the cabinet.
Be sure that the temperature class complies with the products that
have to be kept in the cabinet (see catalogues and technical tables).
For any information please get in touch with the retailer. A wrong
about 6 cm
image 5
37
I
GB
F
D
NL